How to clean v-groove and fiber clamp chips of 90S+
WATCH THIS VIDEO
Reason to clean v-groove and fiber clamp chips
Fujikura recommend to clean v-groove and fiber clamp chip periodically, because dust on v-groove or fiber clamp may attach to fiber or influence to motion for splicing fiber, and it may result in high splice loss.
Fujikura recommend to clean v-groove and fiber clamp chip periodically, because dust on v-groove or fiber clamp may attach to fiber or influence to motion for splicing fiber, and it may result in high splice loss.
Timing or Frequency to clean v-groove and fiber clamp chips
Recommended frequency to clean: Every day
But if below symptom occur, please clean v-groove and fiber clamp.
1. Fiber position is shifted from center after fiber gapset.
2. “ZL/ZR motor overrun error” occur.
3. Fiber core alignment time is too long.
Necessary Item
Procedure
1. Cleaning v-groove and fiber clamp by cotton swab with alcohol.
1. Cleaning v-groove and fiber clamp by cotton swab with alcohol.
V-groove cleaning
Fiber clamp chips cleaning
Check by Magnifier
V-groove
Fiber clamp chips
2. If it is difficult to remove the dust on v-groove, cleaved fiber may remove the dust easily.
